Made in Darwen · Fitted by our own team

Driveway gates, single gates& matching fencing

Every gate we make is a one-off. We measure your opening, weld the frame in our Darwen workshop and clad it in the composite you picked, so it fits your gap properly instead of being packed out to nearly fit. Driveway pair, single garden gate, and the fencing to match it. Shape the top however you like, or keep it plain and squared. Then we fit the lot ourselves, so you're not left ringing round for an installer.

Free site survey across Lancashire · Fixed written price within 24 hours

Composite gate and matching side panel in charcoal on a powder coated steel frame, made in Darwen and fitted in Lancashire
Real job · Darwen workshop

Built for this drive, not bought in

Charcoal composite on a powder coated steel core. Measured, made and fitted by the same team.

Every gate built individually
Powder coated steel core
Gate and fence fitted as one job
131+ reviews across Lancashire
A real install, start to finish

From empty drivewayto a gate that closes first time

Four photos from one job, taken by us while we worked. Slide the photos across to see exactly what a bespoke composite gate looks like before the composite goes on.

01 / 04
Driveway in Lancashire before a bespoke composite gate was installed
Step 1 · The site

A normal driveway with a gap and an old fence line. We measure the opening, set the posts and get the levels right before anything gets made.

Powder coated steel gate frame installed and ready for composite cladding
Step 2 · Powder coated frame

The welded steel frame goes in, powder coated matte black and still under its protective film. Galvanised first, so nothing is left to rust behind the boards.

Composite boards being fitted to the steel frame of a bespoke gate
Step 3 · Composite going on

Boards fixed to the steel core one run at a time, all from the same batch, so the gate and the fixed panel read as a single piece of work.

Finished bespoke composite gate and matching side panel in charcoal with a powder coated steel frame
Step 4 · Finished and fitted

Charcoal composite on a matte black frame, hung on heavy-duty hinges with the latch and lock set up so it closes first time. Started and finished by the same team.

Want yours measured and made the same way? It starts with a free survey.

Get My Free Quote
What we can make you

Driveway gates, single gates and fencing to match

We build gates one at a time, so there's no size list to pick from and nothing gets trimmed to fit on the day. Tell us which one you need and we'll make it to your opening.

Double driveway gates

Most asked for

The pair that opens for the car every day. Made to the full width of your drive, hung on heavy-duty hinges, with automation if you want to drive straight in.

Single gates

One leaf for a garden path, side entrance or alleyway. Same build as the driveway pair, just narrower, so a pedestrian gate never looks like an afterthought.

Matching fencing

The run that carries on from the gate. Same composite, same batch, same height line, so the gate and fence look like one piece of work rather than two jobs.

The top is your call

Your choice

Custom shape to your own taste, or plain and squared. Show us a photo, sketch it on the back of a quote, or just say squared and be done with it. Either way it's made for you.

Tell us what you need

Survey, build and fitting all done by us. You deal with one team, start to finish.

Gate and fence as one set

Composite gates built one at a time, for your gap

Nothing here comes off a shelf. We measure your opening, weld the steel frame to those measurements, powder coat it, then clad it in the composite you chose. The top can be shaped to suit you, or left plain and squared if that's more your taste. Then we make the fencing to carry the run on in the same finish, from the same batch. Sloping drive, out-of-square wall, awkward post position: it all gets built for.

Composite boards being fitted to a powder coated steel gate frame, with matching fencing to follow, in Lancashire

Mid-install, on a real job

Steel welded, galvanised and powder coated by us before a single board goes on. Nothing gets passed out to a third party.

  • A one-off gate, built to your exact opening
  • Double driveway gates or a single gate
  • Custom shaped top, or plain and squared
  • Matching composite fencing, same batch, same finish
  • Welded steel core, galvanised then powder coated
  • Heavy-duty hinges, latches and lock options
  • Automation on driveway gates if you want it
  • The full job: survey, build and fitting

Then we fit all of it ourselves. No buying a gate and hunting for somebody to install it, no waiting on a second firm to turn up for the fencing. We survey it, we build it, we fit it, and if anything needs a look afterwards it's us you ring.

Workshop crafted, not shop bought

Made for your opening, not adjusted to nearly fit

Buy a gate from a shop and you get a standard size, a flat pack, and a phone number to ring when you need somebody to put it up. Ours start as steel on our workshop bench and finish as a gate that was only ever going to fit one opening: yours. Then we fit it, along with the matching fencing, and we're still the ones you ring years later.

The cheap store-bought gate

Cheaper on the day. Costs more in the end.

  • Fixed sizes, shaved down or packed out to fit your gap
  • Thin hollow frames that flex and rattle in a gale
  • Boards stapled on, working loose within a season
  • Delivered flat-packed, and then you find your own installer
  • Nobody to call once the wagon has gone

Crafted by us at HulmeFencing

Made in our own workshop, fitted by the same hands.

  • Built one at a time, measured to your opening
  • Double driveway gates, single gates or fencing to match
  • Custom shaped top to your taste, or plain and squared
  • Welded steel core, galvanised and powder coated before cladding
  • We survey, build and fit the whole job with our own hands
Price my gate
What's behind the composite

Every bespoke composite gate we make is built on steel

The composite is what you see. The steel core is what makes it last. It's welded square in our workshop, galvanised, powder coated matte black, then clad so no bare metal is ever exposed and nothing is left to rust or repaint. Aluminium and other metals are priced to your preference, but for strength and storm resistance, steel is what we'd put on our own drive.

Weight that holds the gate down

Composite boards are rigid, so they need something rigid behind them. Our steel core is heavier than an aluminium frame, which keeps the gate planted in a gust instead of lifting and slamming. The boards stay flat, and the gate stays quiet.

Stiff enough for a Lancashire gale

A steel frame is roughly three times stiffer than an aluminium frame of the same size. Exposed spots up the moors or nearer the coast will find out the difference: an aluminium gate visibly bows, a steel-cored composite gate holds its line.

Harder to force, harder to cut

Steel resists levering and is tough to get through quietly. If security is why the old gate is coming out, the core behind the composite is what actually does the work.

Repairable instead of replaceable

Aluminium kinks rather than bends, so a knock usually means a new gate. Steel we can straighten, re-weld and re-finish in our own workshop. A knock becomes a repair.

Same size gate, two frames

How they behave once they're actually on your drive.

Steel core composite

What we build as standard

Aluminium framed

Priced on request

Composite boards stay flat
Steel core holds them rigid
Aluminium can let boards move and creak
Weight in a gale
Stays planted, no buffeting
Lighter, so it moves more in exposed openings
If it takes a knock
Straightened, re-welded, re-finished
Kinks, and usually gets replaced
Security
Very hard to lever or cut through
Lighter sections can be forced or cut
Cost for the strength
Usually the cheaper way to real strength
Cheaper only on very light, short gates

A heavier gate needs heavier hinges and a properly bedded post, and we spec both as standard on every job. If you need a very wide, very light gate on automation, aluminium can be the smarter answer. Tell us what you're working with and we'll say which one we'd choose.

Composite of your choice

Your gate, in any composite finish you want

The frame is ours to get right. The finish is yours. Pick a composite board colour and we'll clad your gate and the matching fencing in exactly the same finish, from the same batch, so the whole run reads as one piece of work. No painting, no staining, no rot.

Charcoal

The one most people pick for a modern gate

Wood-grain, brushed or smooth board profiles available. Got a colour from a photo, a door or a neighbour's fence? Bring it and we'll match it as close as composite allows.

Frame finish

Matte black powder coat as standard. Other RAL shades to match your composite on request.

Ask about Charcoal

Composite finish included in your quote

Darwen born, Lancashire wide

Lancashire's best composite gates,made a few miles from your door

We're a Darwen firm, not a national outfit with a Lancashire phone number. Every composite gate and every matching panel is welded, powder coated and clad in our own workshop, then fitted by the same team, so the standard is ours to answer for. It's why homeowners in Darwen and the towns around it keep sending us back to their neighbours.

Fifteen years on the tools here means we know the drives, the weather and the awkward openings. If you want the best composite gate and fencing in Lancashire, you're already in the right postcode.

One workshop

Every gate welded and clad in Darwen

131+ reviews

Across Darwen, Blackburn and beyond

15 years

Fencing Lancashire gardens and drives

24 hours

From survey to a fixed written price

Get a Darwen price

Where we work most

Darwen first, then everywhere around it. Gates and fencing fitted as one job, on the same visit.

Darwen (home)BlackburnAccringtonOswaldtwistleGreat HarwoodRishtonWilpshireMellorTockholesHoddlesdenEdgworthBelmontRamsbottomBoltonChorleyPrestonBurnleyClitheroeLeyland

Not on the list? Ask anyway. We're usually within twenty minutes of most of these.

Our promise

We won't be beaten on priceor on quality. Not locally.

Cheap imported gates are cheaper for a reason. We've been building across Lancashire for fifteen years and this is the work we're proudest of. Send a like-for-like written quote from anyone local and we'll beat it. If we can't, we'll tell you straight and you can take theirs with our blessing.

  • A like-for-like written quote beaten, not vaguely matched
  • Composite, aluminium and other metals priced to what you want to spend
  • Finish and matching fencing included in the same fixed price
  • Free survey across Lancashire, no deposit just to get a price
  • Crafted and fitted by us, never passed to a subcontractor

Get your price this week

Ring, message or send us the details and we'll book the survey. You'll have a fixed price within 24 hours of us seeing the job.

07516 651616 · 7 days a week

Straight answers

Bespoke composite gate questions

The things people ask us before they order.

Fit, frame and finishing. A shop-bought gate is a fixed size that gets packed out or trimmed to get close to your opening, and once it lands you still have to find somebody to install it. Ours are measured to the millimetre and built to that measurement on a welded steel core rather than a thin hollow frame, with the boards fixed on properly and hardware chosen for the weight. We then fit it ourselves. You can see the difference in how it closes, and in how it still looks five winters later.
Made in Darwen · Powder coated · Fitted by us

Tell us the gap you've gotand we'll build the gate to fit it

Free survey, honest advice on the finish, the material and whether your top wants shaping or squaring off, and a fixed price within 24 hours. We make it, we fit it, and we're the ones you ring afterwards. Give us a shout or send a photo on WhatsApp and we'll tell you exactly what we'd build.