
Bespoke wooden gates, made to measure in Lancashire
Driveway gates, garden gates and side gates built for the opening you actually have, not the nearest size on a shelf. Properly braced frames, hinges that carry the weight, and boards that match the fence beside them.
- Measured and built on site
- Galvanised iron fixings
- Free survey, fixed price
Gates we built, photographed the day we finished
Every one of these is a gate we built and hung, with the posts and the fence it sits in from the same batch of timber.





Our gates, filmed on the day we finished
No renders, no stock footage. Press play on any of these and you are looking at a Lancashire gate we built and hung ourselves.
How a bespoke gate job runs
Send a photo and the opening size
A picture of the gap and the distance between your posts is enough for a sensible starting figure.
Survey the opening properly
We check the posts, the ground, the swing and access before anything is quoted.
Built on site to your measurements
Frame cut and braced for your span, then built and clad where it will hang, so it fits first time.
Hung, adjusted, handed over
New posts concreted if needed, gate hung and adjusted, hardware fitted and shown to you.
A gate is not a fence panel stood on its end
It hangs from two points and gets slammed a hundred times a week, so the frame, the brace and the way it is hung decide whether it still shuts cleanly in ten years.
Built to your opening, not a catalogue size
We measure the gap you actually have, allow the clearance it needs to swing all year, then build the gate on site to that measurement.
A frame that carries the weight
Properly sized stiles and rails with a diagonal brace running the right way, so a wide pair does not twist and stop meeting in the middle.
Treated softwood or hardwood
Pressure-treated softwood for most gardens, hardwood where the boundary is exposed, and galvanised iron fixings throughout.
Gates that match the fence
Same boards, same capping, same stain as the run beside it, so the whole boundary is one job finished to one standard.
Wooden gates fitted across Darwen and Lancashire
We build in Darwen and fit across the county, usually surveying Blackburn, Accrington, Bolton and Chorley within a week.
- Darwen
- Blackburn
- Accrington
- Bolton
- Chorley
- Preston
- Leyland
- Clitheroe
- Burnley
- Rossendale
Bespoke wooden gate questions
How much does a bespoke wooden gate cost in Lancashire?
A single garden gate, made to measure and hung on new posts, starts around £260 and usually lands between £260 and £450 depending on height, cladding and hardware. A double driveway pair runs from £900 for a 3m opening up to around £2,400 for a wide, heavily braced pair. Hardwood and automation are quoted separately so you can see exactly what they add.
How long does a made-to-measure gate take?
Most garden and side gates are built and fitted within a week or two of the survey. Double driveway pairs take two to three weeks because the frame is built and braced for the span before it is clad. If you are replacing a gate that has already fallen off its hinges, tell us on the phone and we will do what we can to bring the fitting forward.
Should I choose treated softwood or hardwood?
Pressure-treated softwood suits most Lancashire gardens and costs a good deal less. Hardwood earns its money on an exposed, windy boundary, where it holds its shape better. We will tell you honestly which one suits your opening.
Can you hang a new gate on my existing fence?
Sometimes, but the gate post carries all the weight, so it has to be sound and set deep enough. If it needs replacing we will say so before you commit.
Will the gate match my fencing?
Yes. Same board, same spacing, same capping and finish as the fence it sits in, so the boundary reads as one piece of work.
Let's price your wooden gate
Send a photo of the opening and the distance between the posts on WhatsApp for a quick guide price, or book a free survey in Darwen, Blackburn or anywhere across Lancashire.
Measured on site, built to fit, hung so it swings on one finger.

